| No. |
Contents |
Parameter Descriptions |
| 1 |
Interior Drainage |
The bottom surface of the inner chamber has a certain inclination for cleaning and discharge. |
| 2 |
Verification Hole |
A verification interface that can accommodate 16 temperature probes to be inserted into the inner chamber. |
| 3 |
Heat Preservation |
Using chlorine-free and asbestos-free materials (high-quality aluminum silicate fiber cotton) for insulation, the thickness of the insulation cotton reaches 100mm, ensuring that its surface temperature does not exceed 45 ℃ at room temperature. The outer surface is covered with stainless steel insulation cover. |
| 4 |
Welding of Internal Accessories |
Adopting a sinking screw fixation structure, this nonprotruding structure protects the dried material from scratches, while the flat surface is easier to clean and corrosion-resistant. |
| 5 |
Internal Framework |
The equipment is equipped with a cabinet frame structure as a whole to ensure good rigidity and balance of the oven. The bottom is sealed with an outer sealing plate and a bottom plate, made of 304 stainless steel. |
| 6 |
Convective Wall |
Laser punching, with a diameter ranging from small to large, and uniform distribution of air volume. |
| 7 |
Interior Car |
The column of the drying car is made of 30 * 30 * 1.2mm 304 stainless steel square tube, which is welded by argon arc welding. The wheels are made of high-temperature resistant nylon wheels, and each baking car is equipped with two directional wheels and two universal wheels. |
| 8 |
Trays |
One press forming, beautiful and elegant. It is divided into straight-edge baking plates and rolled-edge baking plates. Rolled-edge baking pans are prone to dead corners and cannot be cleaned thoroughly, gradually becoming obsolete. The mainstream is straight-edge baking pans. Thickness 0.8 1.0 and 1.2mm. Divided into mirror and frosted baking discs, with holes at the bottom. |
| 9 |
Radiator |
Integrated finned heat sink increases heat exchange efficiency, improves drying efficiency, and reduces drying time. Assembling multiple sets of finned tubes has a higher heat transfer area than a single finned tube. The overall disassembly and installation are convenient. |
